Block paving is the surface we are asked for more than any other across Shrewsbury, Telford and the rest of Shropshire, and it has stayed at the top for good reason. It is hard-wearing, it comes in a huge range of colours and patterns, and individual blocks can be lifted and relaid if you ever need to. In this guide we cover what a block paving driveway costs, the patterns and colours worth knowing about, how it is laid properly, and how it compares with resin and tarmac.
Why Block Paving Remains the Most Popular Driveway Choice
Walk around almost any estate in Telford, Shrewsbury or Newport and you will see block paving everywhere. There is a reason it has been the default driveway surface in the UK for decades, it does a lot of things well at once.
It is extremely durable, with a properly laid drive comfortably lasting 25 years or more. The choice of colours, sizes and laying patterns is enormous, so you can match almost any property, from a Victorian terrace in Shrewsbury to a modern detached home near Telford. And because the surface is made up of individual blocks, any that get damaged, or any section that has to come up so a pipe or cable can be reached, can be lifted and relaid without an ugly patch. As Tobermore registered installers, we lay a great deal of block paving across the county.
How Much Does a Block Paving Driveway Cost?
As with any driveway, the honest answer is that it depends on the size of the area, the condition of the existing ground and how much excavation and drainage is needed. As a rough guide for Shropshire, block paving works out at around £80 to £120 per square metre fully installed. A typical two-car driveway of 40 to 50 square metres therefore comes in at roughly £4,000 to £7,000, depending on the blocks you choose and the groundwork involved.
That puts it above tarmac and gravel, and broadly in line with or a little above resin bound, but you are paying for a surface with the longest lifespan of the common options and the widest choice of looks. For a fuller breakdown across all surfaces, see our driveway cost guide.
What Affects the Price?
The block itself is only part of the cost. Premium ranges with better colour retention cost more than standard blocks. Curved designs, multiple colour zones and feature areas like circles or diamonds all add to the installation time, and therefore the price. The biggest single variable is groundwork: if an old surface has to come up and the ground beneath needs work, that adds to the total.
Block Paving Compared to Other Surfaces
Choosing a driveway is always a set of trade-offs between cost, looks, lifespan and maintenance. Here is how block paving sits alongside the other surfaces we install:
| Surface | Typical Cost (per m2) | Lifespan | Key Advantages |
|---|---|---|---|
| Block Paving | £80 to £120 | 25+ years | Huge range of styles, individual blocks can be replaced, permeable options available |
| Resin Bound | £60 to £100 | 15 to 25 years | Smooth seamless finish, low maintenance, naturally permeable |
| Tarmac | £50 to £80 | 15 to 20 years | Affordable, quick to install, handles heavy vehicles well |
| Gravel | £30 to £60 | Indefinite (with top-ups) | Cheapest option, fully permeable, no planning permission needed |
For a more detailed comparison of all four, have a look at our guide to choosing the right driveway. What suits a three-bed semi in Telford might not be the best choice for a rural property near Market Drayton.
Choosing Your Blocks: Colours and Styles
The blocks themselves make the biggest difference to how a finished drive looks. We are Tobermore registered installers, and their premium ranges hold their colour noticeably better over the years than budget blocks, which is worth paying a little more for on a surface you will look at every day.
Charcoal and brindle blends are consistently the most popular across Shropshire, usually with a contrasting border course to frame the drive. Lighter buff and silver tones suit modern properties, while traditional clay pavers work beautifully with period and cottage homes. Mixing two colours, or adding a simple border, lifts a drive without adding much cost.
Block Paving Patterns at a Glance
The pattern you lay the blocks in is not just about looks, it affects how the surface holds up under vehicle weight. Here are the main ones:
- Herringbone: blocks laid at 45 or 90 degrees in an interlocking zig-zag. It is the strongest pattern and the right choice for any driveway that takes vehicle weight.
- Stretcher bond: a simple brick-style offset. Clean and economical, it suits paths and patios more than load-bearing drives.
- Basketweave: a traditional, decorative look that works well on period properties and lighter-use areas.
We go into far more detail, with the pros and cons of each, in our dedicated block paving patterns guide.
How a Block Paving Driveway Is Laid
The blocks are the part you see, but the strength of a block paving drive comes from what goes underneath. Cutting corners on the groundwork is the single most common reason a drive sinks, rocks or sprouts weeds within a couple of years. A proper installation runs like this:
1. Excavation and Sub-base
We dig out to the correct depth and lay a compacted sub-base, normally around 150mm of MOT Type 1 for a driveway, to create a stable, load-bearing foundation. A shallow sub-base is a false economy that shows up later as ruts and dips.
2. Edge Restraints
The whole drive is contained by edge restraints, usually kerbs or edging blocks haunched in concrete. Without solid edges, the blocks gradually creep outwards and the pattern opens up. This step is invisible once finished, which is exactly why cheap jobs skimp on it.
3. Laying Course and Blocks
A screeded layer of sharp sand forms the laying course, and the blocks are laid onto it in your chosen pattern, with the correct falls so rainwater runs away from the house. Cuts around the edges and any features are made with a block splitter or saw for a tidy finish.
4. Compaction and Jointing
The blocks are vibrated down with a plate compactor, then kiln-dried sand is brushed into the joints and the surface compacted again. The sand is what locks the blocks together and lets the surface flex under load without cracking.
The Corner That Gets Cut
If a block paving quote is much cheaper than the rest, the saving almost always comes from a thinner sub-base, missing edge restraints or a rushed jointing stage. None of it is visible on the day the job finishes. It shows up a winter or two later as sinking, spreading and weeds. Always ask about sub-base depth and how the edges are restrained.
Permeable Block Paving and Planning Permission
Standard block paving is an impermeable surface, so on areas over five square metres you either need to drain it to a permeable area or you may need planning permission. The simplest way around this is permeable block paving, which uses wider joints and a special sub-base so rainwater drains straight through the surface. It looks almost identical to standard block paving but is SuDS compliant, so it usually avoids the need for permission entirely.
We cover the rules in plain English in our driveway planning permission guide, which is worth a read before you commit to a non-permeable surface.
Maintenance and Aftercare
One of block paving's quiet advantages is how little it asks of you. A well-laid drive needs only simple upkeep:
- Sweeping: an occasional brush keeps debris out of the joints and the surface looking sharp.
- Weeds: the odd weed can appear in the joints, but a properly sanded drive keeps this to a minimum. A patio cleaner or weed treatment sorts any that do show.
- Re-sanding: top up the kiln-dried jointing sand every few years, particularly after pressure washing, to keep the blocks locked together.
- Sealing: optional, but a sealer makes stains easier to lift, stabilises the jointing sand and deepens the colour. See our block paving aftercare page for more.
Block Paving Driveways Across Shropshire
We design and install block paving driveways right across the county, and the right blocks and pattern often depend on the property. We work regularly in Shrewsbury, Telford and Wellington, out to Market Drayton, and across Oswestry, Newport, Whitchurch and the surrounding villages. Wherever you are, the fundamentals stay the same: a deep, compacted sub-base, solid edge restraints, herringbone for the load-bearing areas, and well-jointed blocks finished with the right falls for drainage.
Common Questions We Get Asked
How much does a block paving driveway cost in Shropshire?
Block paving for a standard two-car driveway (40 to 50 square metres) typically costs £4,000 to £7,000 in Shropshire, which works out at around £80 to £120 per square metre fully installed. Premium block ranges, curved designs and feature patterns push the cost towards the higher end.
How long does a block paving driveway last?
A properly installed block paving driveway will last 25 years or more. Longevity comes down to the groundwork: a deep, compacted sub-base, solid edge restraints and well-jointed blocks. Because the surface is made of individual blocks, it can also be repaired in sections rather than relaid wholesale.
Does block paving need planning permission?
Standard, impermeable block paving over five square metres may need planning permission unless rainwater drains to a permeable area. The simplest solution is permeable block paving, which is SuDS compliant and lets water drain through the surface, so it usually avoids the need for permission entirely.
What is the best pattern for a block paving driveway?
Herringbone is the best pattern for a driveway. Laid at 45 or 90 degrees, the interlocking blocks resist the twisting forces of vehicle wheels far better than simpler patterns, which makes it the strongest and most durable choice for any surface that takes vehicle weight.
Does block paving get weeds between the blocks?
A well-laid and properly sanded drive keeps weeds to a minimum, but the odd one can appear in the joints over time. Keeping the kiln-dried jointing sand topped up, an occasional sweep and the odd weed treatment keep it under control. Sealing the surface reduces it further.
Can you replace individual block pavers?
Yes, and it is one of block paving's biggest advantages. Individual blocks can be lifted and relaid if they are damaged, or a section can be taken up to reach a pipe or cable and put back without an obvious patch. It is a practical benefit that is easy to overlook until you need it.
Ready for a Quote?
The best next step is a free site visit. We need to see the space, check the levels and drainage, and understand how you want to use the drive before we can give you an accurate price. A good quote will set out the sub-base depth and edge detail, not just a headline figure.
We install block paving driveways across Shrewsbury, Telford and all of Shropshire. Get in touch and we will arrange a convenient time to come and have a look.
Considering a Block Paving Driveway?
Free site surveys and no-obligation quotes across Shrewsbury, Telford, and all of Shropshire.
