Tarmac has been a popular choice for driveways across Shrewsbury, Telford and the rest of Shropshire for decades, and for good reason. It's tough, it's relatively affordable, and when it's installed properly it gives you a clean, smart finish that lasts. But there's more to a tarmac driveway than meets the eye, and not all installations are equal. Here's our honest guide to what's involved, what it costs, and what to look out for.
Why Tarmac Driveways Are Still So Popular
Walk down most residential streets in Telford, Shrewsbury or Market Drayton and you'll see tarmac driveways everywhere. There's a reason for that, tarmac ticks a lot of boxes for a lot of people.
It's one of the most cost-effective driveway surfaces available. The installation is quicker than block paving or resin bound, which keeps labour costs down. It handles heavy vehicles without complaint, something that matters if you've got a van, caravan or multiple cars on the drive. And it gives a neat, uniform appearance that suits most property styles, from new builds on the estates around Telford to period homes in Shrewsbury's suburbs.
Tarmac is also forgiving. Small imperfections in the sub-base that might cause problems with rigid surfaces like block paving tend to be absorbed by tarmac's slight flexibility. It copes well with Shropshire's freeze-thaw cycles too, provided the depth and drainage are right, which brings us to the most important part of any tarmac installation.
What Goes Into a Proper Tarmac Driveway
The single biggest factor in how long a tarmac driveway lasts isn't the tarmac itself, it's what goes underneath it. A proper installation starts with excavation down to solid ground, followed by a compacted sub-base of crushed stone or hardcore, and then the tarmac layers on top.
Getting the Depth Right
For a domestic driveway taking standard cars, you need a minimum of 150mm (6 inches) of compacted sub-base, topped with a 25mm base course (binder course) and a 25mm wearing course. That gives you a total tarmac depth of around 50mm on top of the sub-base.
If the drive needs to take heavier vehicles, delivery lorries, skip wagons, that sort of thing. You'll want a thicker sub-base, typically 200-250mm, and a thicker binder course. Getting this wrong is where problems start. Too thin and you'll get cracking and settlement within a couple of years, particularly on the clay-heavy soils we see across much of Shropshire.
Watch Out for Thin Installations
One of the most common shortcuts we see is tarmac laid too thin, directly over old surfaces or with an inadequate sub-base. It might look fine for the first few months, but within a year or two you'll see cracking, sinking and drainage problems. If someone quotes you a price that seems too good to be true, ask specifically about sub-base depth and tarmac thickness. A reputable contractor will be happy to explain exactly what they're laying and why.
Drainage and Edging
Water management is critical with tarmac. Unlike permeable block paving, standard tarmac is an impermeable surface, water runs off it rather than through it. That means you need adequate falls (gradients) to direct rainwater towards a drain, channel or soakaway rather than towards your house or onto the pavement.
Edging is equally important. Without proper edging, whether that's a kerb, block paving border, or concrete haunch. The edges of a tarmac drive will crumble and break away over time. We see this a lot on older driveways around the county, where the original edging has failed or was never installed properly in the first place.
How Much Does a Tarmac Driveway Cost?
This is the question everyone asks, and the honest answer is: it depends. We know that's not what you want to hear, but the price genuinely varies depending on the size of the area, the condition of the existing ground, how much excavation is needed, and whether any drainage work is required.
As a rough guide for Shropshire, you can expect to pay somewhere in the region of £50-£80 per square metre for a straightforward tarmac driveway with proper excavation, sub-base and edging. A typical two-car driveway of around 40-50 square metres would therefore come in at roughly £2,000-£4,000, depending on the specifics.
That's noticeably cheaper than block paving (which typically starts around £80-£120 per square metre) or resin bound surfacing (£60-£100 per square metre). It's one of the main reasons tarmac remains so popular, particularly for larger driveways where the cost difference adds up quickly.
What Affects the Price?
The biggest variable is ground preparation. If your old driveway needs ripping up and the ground beneath needs extensive work, that adds to the cost. Access can affect pricing too, if we can't get a delivery wagon close to the site, that increases the labour involved. We always prefer to visit and give a proper quote rather than guess over the phone.
Permeable Tarmac: Worth Knowing About
If you've read our guide to driveway planning permission, you'll know that covering more than five square metres of your front garden with an impermeable surface requires planning permission. Standard tarmac is impermeable, which means most tarmac driveways fall under this rule.
Permeable tarmac (sometimes called porous asphalt) is an alternative that allows water to drain through the surface into the sub-base below. It avoids the need for planning permission and has genuine environmental benefits, particularly relevant in flood-prone areas along the Severn and its tributaries.
The surface looks similar to standard tarmac but has a slightly more open texture. It needs a specially designed sub-base to hold and gradually release the water, which adds some cost to the installation. But for many homeowners, avoiding the hassle and expense of a planning application makes it worthwhile. Have a look at our permeable paving page for more detail on how it works.
How Long Does a Tarmac Drive Last?
A properly installed tarmac driveway with adequate sub-base depth and good drainage should last 15-20 years before needing any significant work. Many last longer than that with basic maintenance, we regularly see tarmac driveways in Shrewsbury and across Shropshire that are 25-30 years old and still in decent condition.
The main things that shorten a tarmac driveway's life are poor installation (particularly insufficient depth), fuel or oil spills that dissolve the bitumen binder, and heavy static loads in the same spot, parked caravans or trailers, for example, can cause indentations over time, especially in warm weather.
Basic maintenance makes a real difference. Sweep it occasionally, deal with oil spills quickly, and fill any cracks before winter so water doesn't get in and freeze. After 10-15 years, applying a tarmac restorer or sealant can extend the surface life and bring back the colour if it's gone grey.
Resurfacing an Existing Tarmac Driveway
If your existing tarmac driveway is looking tired but the sub-base is still solid, resurfacing can be a cost-effective alternative to a complete replacement. This involves laying a new wearing course over the existing surface, giving you a fresh finish at a fraction of the cost.
The key word there is "if the sub-base is still solid." Resurfacing only works when the underlying structure is sound. If there are areas of significant cracking, sinking or potholing, it usually means the sub-base has failed and resurfacing will just give you a temporarily nice-looking surface with the same problems underneath. In those cases, the proper solution is to take it up and start again.
We're always honest about this. If resurfacing will work, we'll recommend it and save you money. If it won't, we'll tell you that too, because there's no point spending money on a cosmetic fix that won't last. We carry out tarmac resurfacing across Shrewsbury, Telford, Oswestry and the surrounding areas.
Tarmac Compared to Other Surfaces
Choosing a driveway surface is always about trade-offs. Here's a quick comparison to help you weigh up the options:
| Surface | Typical Cost (per m²) | Lifespan | Key Advantages |
|---|---|---|---|
| Tarmac | £50-£80 | 15-20 years | Affordable, quick to install, handles heavy vehicles well |
| Block Paving | £80-£120 | 25+ years | Huge range of styles, individual blocks can be replaced, permeable options available |
| Resin Bound | £60-£100 | 15-25 years | Smooth finish, low maintenance, naturally permeable |
| Gravel | £30-£60 | Indefinite (with top-ups) | Cheapest option, fully permeable, no planning permission needed |
For a more detailed comparison, have a look at our guide to choosing the right driveway. Every property and budget is different, and what works perfectly for a three-bed semi in Telford might not be the best choice for a rural farmhouse near Market Drayton.
Finding the Right Tarmac Contractor in Shropshire
We'll be upfront, tarmac installation attracts more than its fair share of cowboys. The materials and equipment are relatively accessible, which means there are plenty of operators out there who'll offer you a cheap price and do a poor job. Here's what to look for when choosing a tarmac contractor:
- Ask about sub-base depth – Any reputable contractor will be able to tell you exactly how deep they'll excavate and what sub-base they'll use. If they're vague about this, walk away.
- Check for proper equipment – A proper tarmac driveway needs machine-laid tarmac, not hand-laid from wheelbarrows. Machine-laying gives a consistent depth and finish that hand-laying simply can't match.
- Look at previous work – Ask to see examples of driveways they've completed, ideally ones that are a couple of years old so you can see how they've held up.
- Get a written quote with specifics – The quote should detail excavation depth, sub-base material and depth, tarmac layer thicknesses, edging type, and drainage provisions. If it just says "tarmac driveway, £X," that's not enough detail.
- Be wary of door-to-door offers – The "we're working in your area and have some tarmac left over" approach is a classic sign of an operator best avoided. Reputable contractors don't need to cold call for work.
Our Approach
We've been installing tarmac driveways across Shropshire for over 29 years. Every job gets a proper site survey, a detailed written quote, and installation to the correct specification for your property and usage. We're happy to explain exactly what we're doing and why, because good tradespeople have nothing to hide.
Is Tarmac Right for Your Driveway?
Tarmac is an excellent choice if you're looking for a practical, affordable driveway surface that'll give you years of reliable service. It's particularly well suited to larger driveways where cost is a significant factor, and to properties that need to handle heavier vehicles.
If appearance is your top priority and budget allows, block paving or resin bound will give you more design options. If you want to avoid planning permission complications, permeable tarmac or permeable block paving are worth considering. And if you simply want the most affordable option, a well installed gravel driveway will cost less than tarmac.
Whatever you're leaning towards, we're happy to have a no-pressure chat about what would work best for your property. We install all types of driveways across Shrewsbury, Telford, Market Drayton, Oswestry and the whole of Shropshire, and we'll always give you an honest recommendation, even if that means steering you away from the most expensive option.
Browse our tarmac driveways page for more detail, or get in touch for a free, no-obligation quote.
Ready to Get a Quote for Your Tarmac Driveway?
Free, no-obligation quotes with a detailed written specification. We cover Shrewsbury, Telford, Market Drayton, Oswestry and all of Shropshire.
